Triple Module 2.7 Watch Winder with Cover and Storage The 2.7 makes an ideal companion for self-winding watches because it simulates the wrist action, rotating the timepiece as if it were being worn and keeping it wound and ready to wear at a moment’s notice. It’s new rotation setting options — from 300 to 1200 rotations— double the TPD (Turns Per Day) if set Bi-Directional. This allows the mainspring an opportunity to release its stored energy with a nominal amount of energy being spent, keeping the focus on reliability. The new 2.7 Triple Watch Rotator with cover and storage is constructed with a sturdy wooden frame in a supple black pebble finish textured material (outside); silver textured silk faceplate; shiny chrome hardware, recessed metal hinges, a lock, and operates on either 3.3V Adapter (included) or D- Cell batteries (not included). . It features a see-through tempered glass lid, and will wind three watches, and house up to six additional watches in the upper storage compartment and inside Wolf’s signature pull out travel box. A great value with all the bonus storage!
Details Supple pebble finish exterior Silver textured silk faceplate Handcrafted wooden frame Houses up to nine automatic watches (with three watches winding simultaneously) and other valuables Polished chrome control panel Pull-out travel box “Lock” in cuff accommodates a wrist size in excess of 10” Runs on 3.3V (110/220V) Adapter (included) or D-cell batteries Battery pack: Lithium or Alkaline Drum size: 71mm deep and 77mm wide Dimensions: 17.75”w x 7.75”d x 8.75”h
Features Backlit LCD display: New display screen powers on when control knobs and buttons are utilized or when the chrome plate is touched. Screen will stay lit for 20 seconds Rotation Options: : New rotation setting options – from 300 to 1200 rotations. Double the TPD (Turns Per Day) if set Bi-directional. By turning the knob on the “ON” setting, the LCD screen will illuminate and rotation settings can be selected by pressing the “+” or “-“ buttons. By pressing the “+” or “-“ button, you can select rotations in increments of 50 Directional Settings: The knob to the left of the LCD screen provides options to select rotational direction: A= Clockwise; B= Counter Clockwise; and C= Bi-directional Delayed Program Start: New start delay options from 6 hours to 72 hours (Default is 24 hours). By turning the knob from “ON” to the delay icon you can select rotation start delay. With the “+” or “-“ buttons you may select in 6 hour increments from 6 hours to 72 hours Rotation Countdown: the LCD screen provides a countdown of the remaining rotations to complete the daily cycle Program Capacity: The individual options of rotation and direction settings combine to offer 57 personal programming options. Watch Cuff: The new cuff has been redesigned to fit today’s bigger and heavier watches. The new design “locks” the cuff into the rotator drum. You will feel and hear when the cuff is securely in place Battery Option: Option to run the unit on either 3.3V Adapter (included) or D-Cell batteries. The units now include a built in sensor that allows the use of either Alkaline or Lithium batteries. (Lithium batteries have twice the life of an Alkaline battery) LED Signals: A green light indicates normal rotator operation. A red light indicates either low battery power or that the drum is incorrectly turning Construction: Module 2.7 winders are constructed with sturdy wood frames. Metal hinges and locks are recessed with integrated 90-degree lid stoppers, and a new gray textured silk faceplate